Upgrade Your Itautec PC to Windows® 7

Windows®. Life without Walls™.
Itautec recommends Windows® 7.

To open/close the itens content, click on it.

InfoWay Note L9310 Netbook Reinstallation for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (Drivers & Download)
- Webcam Application [required]
  - Unzip the CAMERA.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Hotkey application and driver [required]
  - Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
- Uninstall the "Bluetooth Stack for Windows by Toshiba" software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Updating a existing installation of Windows Vista to Windows 7

This equipment was never sold with Windows Vista, we do not have this option for the W7010.

Updating a Windows XP installation to Windows 7

Can not upgrade from Windows XP to Windows 7 without loss of the contents of the hard disk. Thus, to install Windows 7 with Windows XP pre-installed, must be made Reinstallation of equipment with Windows 7.
ALL THE HD CONTENT WILL BE HARD OFF. MAKE SURE TO HAVE A BACKUP OF ALL FILES THAT YOU WANT TO KEEP.

Upgrading an installation of Windows XP to Windows 7

You cannot upgrade from Windows XP to Windows 7 without loss of the contents of the hard disk. Thus, to install Windows 7 with Windows XP pre-installed, you must replace the operating system with Windows 7.
DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO MAKE A COPY OF ALL FILES THAT YOU WANT TO KEEP.

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message "Press any key to boot from CD or DVD" appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the "Install now" button.
Read the license terms and, if you agree, click "I accept the license terms" and the NEXT button to continue installation.
Click the "Custom (advanced)" option.
Click on "Drive options", select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, "John" and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, "Joao063049" and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click "Use recommended settings".
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click "Ignore".
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note N8320 Netbook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- OSD Driver [required]
  - Unzip the SMC.ZIP file, run the SCMSetup.exe file and follow the installation steps.
- Bluetooth Driver [required]
  - Unzip the BT.ZIP file, run the SETUP.EXE file and follow the installation steps.
- Fingerprint Driver (and application) [required]
  - Unzip the Fingerprint.ZIP file, run the SETUP.EXE file and follow the installation steps.
- CIR Driver [required]
  - Unzip the CIR.ZIP file, run the SETUP.EXE file and follow the installation steps.
- Graphics Driver [required]
  - Unzip the VGA.ZIP file, run the SETUP.EXE file and follow the installation steps.
- TPM Application [required]
  - Unzip the TPM.ZIP file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Uninstall the “Bluetooth Stack for Windows by Toshiba” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
São Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
- Install the “SCM.ZIP” (OSD) application previously downloaded from the Itautec website.
- Install the “BT.ZIP” (Bluetooth) application previously downloaded from the Itautec website.
To finish your installation:
- You must Activate your new copy of Windows 7 via the Internet (if this is not done in 30 days, your copy may have its limited functionality and / or blocked).
- We recommend that Windows Update be run to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend it to be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c, 3d, 3e (optional) and 3f (optional) on Before You Begin.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note W7410 Netbook Reinstallation for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (Drivers & Download)
- Webcam Application [required]
  - Unzip the CAMERA.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Hotkey application and driver [required]
  - Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
- Uninstall the "Bluetooth Stack for Windows by Toshiba" software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Updating a existing installation of Windows Vista to Windows 7

This equipment was never sold with Windows Vista, we do not have this option for the W7010.

Updating a Windows XP installation to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message "Press any key to boot from CD or DVD" appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the "Install now" button.
Read the license terms and, if you agree, click "I accept the license terms" and the NEXT button to continue installation.
Click the "Custom (advanced)" option.
Click on "Drive options", select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, "John" and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, "Joao063049" and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click "Use recommended settings".
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click "Ignore".
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Net W7010 Netbook Reinstallation for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (Drivers & Download)
- Webcam Application [required]
  - Unzip the CAMERA.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Hotkey application and driver [required]
  - Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the "Intel® PROSet / Wireless WiFi" software (uninstall should be done through the Control Panel - Programs - Uninstall a Program)
- Uninstall the "Bluetooth Stack for Windows by Toshiba" software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Updating a existing installation of Windows Vista to Windows 7

This equipment was never sold with Windows Vista, we do not have this option for the W7010.

Updating a Windows XP installation to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message "Press any key to boot from CD or DVD" appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the "Install now" button.
Read the license terms and, if you agree, click "I accept the license terms" and the NEXT button to continue installation.
Click the "Custom (advanced)" option.
Click on "Drive options", select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, "John" and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, "Joao063049" and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click "Use recommended settings".
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click "Ignore".
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note N8330 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- OSD Driver [required]
  - Unzip the SMC.ZIP file, run the SCMSetup.exe file and follow the installation steps.
- Bluetooth Driver [required]
  - Unzip the BT.ZIP file, run the SETUP.EXE file and follow the installation steps.
- Fingerprint Driver (and application) [required]
  - Unzip the Fingerprint.ZIP file, run the SETUP.EXE file and follow the installation steps.
- CIR Driver [required]
  - Unzip the CIR.ZIP file, run the SETUP.EXE file and follow the installation steps.
- Graphics Driver [required]
  - Unzip the VGA.ZIP file, run the SETUP.EXE file and follow the installation steps.
- TPM Application [required]
  - Unzip the TPM.ZIP file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Uninstall the “Bluetooth Stack for Windows by Toshiba” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
São Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
- Install the “SCM.ZIP” (OSD) application previously downloaded from the Itautec website.
- Install the “BT.ZIP” (Bluetooth) application previously downloaded from the Itautec website.
To finish your installation:
- You must Activate your new copy of Windows 7 via the Internet (if this is not done in 30 days, your copy may have its limited functionality and / or blocked).
- We recommend that Windows Update be run to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend it to be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c, 3d, 3e (optional) and 3f (optional) on Before You Begin.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note W7635 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (Drivers & Download)
- Graphics Application [required]
  - Unzip the VGA.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Power Manager application and driver [required]
  - Unzip the PM.ZIP file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Uninstall the “Bluetooth Stack for Windows by Toshiba” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Updating a existing installation of Windows Vista to Windows 7

This equipment was never sold with Windows Vista, we do not have this option for the W7010.

Updating a Windows XP installation to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note N8620 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Webcam Application [required]
  - Unzip the YOUCAM.ZIP file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:

No need to uninstall any application

Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

This equipment was never sold with Windows Vista.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c on Before You Begin..
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

Limited functionality to perform the installation of Windows 7

The shortcut keys do not work and do not have visual feedback on the LCD screen (On Screen), they do not have drivers for Windows 7.
The quick access buttons do not work, because they have no drivers for Windows 7.
The LED indicates that received mail does not work.

InfoWay Note N8630 Notebook Upgrade for Windows 7.

Untitled Document

Before You Begin:

1- We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.

2- For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure

Print these instructions to serve as a roadmap during the upgrade process.
Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
- 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
- 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
- 16 GB of available disk space (32 bit) / 20 GB (64 bit)
- DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
- Compatible DVD driver
- Internet access (fees may apply)
  NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
  d. Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
  e. Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
f. Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.

3- Make the following downloads via www.itautec.com (área de Drivers & Download)

a. Fingerprint Driver [required]
- Unzip the FPRINT.ZIP file, run the SETUP.EXE file and follow the installation steps.
Security Application [required]
- Unzip the WAVE_N8630.ZIP file, run the STM-G1-V1_00_32.EXE file and follow the installation steps.
Mobile Utility Application [required]
- Unzip the MOBILEUTILITY.ZIP file, run the SETUP.EXE file and follow the installation steps.

4- Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:

a. Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
b. Uninstall the “Bluetooth Stack for Windows by Toshiba” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)

5- Limitations:

Versions of Nero Essentials will not be supported in Windows 7.
AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.

6- Note that:

The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
The cost of Internet access is the responsibility of the user.
Support for applications and devices installed by users is the responsibility of their respective manufacturers.
Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
The customer is responsible for backing up data, and no technical support for this operation will be provided.

7- Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
São Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

1. Start the equipment with the current operating system (Windows Vista).

2. Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.

3. Insert the Windows 7 installation DVD in the drive.

4. In the Autoplay window, click “Run setup.exe”.

5. Click “Install now”.

6. Wait while the installation completes.

7. At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.

8. Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.

9. Click the “Upgrade” option and wait for the installation to be completed.

10. On the “Compatibility Report” window, click NEXT.

a. If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

11. Wait while the installation completes. This process may take more than one hour.

12. Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).

13. On the security settings window, click “Use recommended settings”.

14. Adjust the time zone, date and time and click NEXT to continue.

15. If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.

16. Wait for Windows 7 to start.

17. Install the wireless card driver. This update should be manual:

18. Click on the Start button.

Right click on Computer and select Properties.
Click on Device Manager and open the list of Network Adapters.
Right click on the driver for WiFi network (wireless).
Select the Update Driver Software option.
Click on Browse my Computer for Driver Software.
Click the Browse button and select Computer / DVD Drive.
Press OK and Next.

19. To finish your installation:

You must Activate your new copy of Windows 7 via the Internet (if this is not done in 30 days, your copy may have its limited functionality and / or blocked).
We recommend that Windows Update be run to ensure that all the latest product updates are installed.
If you have an antivirus installed, we recommend it to be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

1. DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.

2. Turn on the equipment; insert the Windows 7 installation DVD in the drive.

3. When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.

4. On the installer home screen (language, date / time format and keyboard), click the NEXT button.

5. Click the “Install now” button.

6. Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.

7. Click the “Custom (advanced)” option.

8. Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.

9. Click the NEXT button.

10. Wait while the installation completes. This process may take more than one hour.

11. Wait for the automatic restart of equipment.

12. When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.

13. Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).

14. Enter the product key (it can be found in the Windows 7 upgrade kit that you received).

15. On the security settings window, click “Use recommended settings”.

16. Adjust the time zone, date and time and click NEXT.

17. If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.

18. Wait for Windows 7 to start.

19. To finish your installation:

Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c on Before You Begin.
Manually update the drivers that were not installed:
- Place the Driver CD into the optical drive.
- Click on the Start button.
- Right click on Computer and select Properties.
- Click on Device Manager.
- Right click on the first driver not installed, represented by a yellow icon.
- Select the Update Driver Software option.
- Click on Browse my Computer for Driver Software.
- Click on the Browse button and select Computer > CD/DVD Drive.
- Press OK and Next.
- Repeat the operation until all items are installed correctly (no yellow icon left).
Reinstall the applications you want (WinDVD, DMF5, Microsoft Office, etc.).
Restore the backup of your documents.
Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note N8635 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- Video Driver [required]
  - Unzip the VIDEO.ZIP file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Webcam Application [required]
  - Unzip the YOUCAM.ZIP file, run the SETUP.EXE file and follow the installation steps.
- OSD Application [required]
  - Unzip the OSD.ZIP file, run the SETUP.EXE file and follow the installation steps.
- Intel® PROSet / Wireless WiFi software [required]
Unzip the WLAN.ZIP file and install using the Device Manager.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Uninstall the “Keyboard Manager” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
Install the wireless card driver. This update should be manual:
- Unzip the file WLAN.ZIP and click on start button;
- Right click on Computer and select Properties.
- Click on Device Manager and open the list of Network Adapters.
- Right click on the driver for WiFi network (wireless).
- Select the Update Driver Software option.
- Click on Browse my Computer for Driver Software.
- Click the Browse button and select Computer / DVD Drive.
- Press OK and Next.
Install the OSD application.
- Unpack the file OSD.ZIP , execute the SETUP.EXE and follow the installation steps;
- After this update, the function keys Fn-F2 (wireless) and Fn-F7 (decrease volume) and Fn-F8 (increase volume) will work normally, but will not provide visual feedback on the LCD screen (On Screen). To resolve the problem the notebook's BIOS must be updated, but this update is not mandatory because the keys do not lose their functionality in the BIOS that is installed on the notebook. Any questions, call Itautec Technical Support.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c on Before You Begin..
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note W7655 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- Webcam Application [required]
  - Unzip the CameraUtility.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TOUCHPAD ZIP file, run the SETUP.EXE file and follow the installation steps.
- Bluetooth Driver [required]
  - Unzip the Bluetooth.zip file, run the SETUP.EXE file and follow the installation steps.
- Hotkey application and driver [required]
  - Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Silent Mode Application [required]
  - Unzip the SilentMode.zip file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- Uninstall the “Intel® PROSet / Wireless WiFi” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
- Uninstall the “Keyboard Manager” software (uninstall should be done through the Control Panel – Programs - Uninstall a Program)
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
Desinstale o Programa “BlueTooth Stack” (Menu → Painel de Controle → Programas → Desinstalar um Programa → Duplo clique em “Bluetooth Stack”para desinstala-lo) e reinicie a máquina.
Desinstale o Programa “Power Manager” (Menu → Painel de Controle → Programas → Desinstalar um Programa → Duplo clique em “Power Manager”para desinstala-lo) e reinicie a máquina.
Install the “Hotkey.zip”application previously downloaded from the Itautec website > Driver and Utility (run setup.exe in both directories)
Install the “CameraUtility.zip”application previously downloaded from the Itautec website.
Install the “SilentMode.zip” application previously downloaded from the Itautec website.
Install the “Bluetooth.zip” application previously downloaded from the Itautec website.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
  We recommend that you run Windows Update to ensure that all the latest product updates are installed.If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note W7650 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.avgbrasil.com.br/itautec (área de Drivers & Download)
- Webcam Driver [required]
  - Unzip the Camera.zip file, run the SETUP.EXE file from the directory “Camera\Bison_non_UVC\Driver” and follow the installation steps.
- Webcam On & Off Application [required]
  - Run the SETUP.EXE file from the directory “Camera\Bison_non_UVC\On&OFF_Status” and follow the installation steps.
- Aplicativo de TouchPad [requerido]
  - Unzip the TouchPad.zip file, run the SETUP.EXE file and follow the installation steps.
- Silent Mode Application [required]
  - Unzip the SilentMode.zip file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:

Uninstall the “Power Manager” application (uninstall should be done through the Control Panel – Programs - Uninstall a Program).

Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
Uninstall the “Power Manager” application (uninstall should be done through the Control Panel – Programs - Uninstall a Program), and restart your equipament.
Install the “SilentMode.zip” application previously downloaded from the Itautec website.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked)
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- .If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c on Before You Begin.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay Note W7645 Notebook Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers & Download)
- Silent Mode Application [required]
  - Unzip the SilentMode.zip file, run the SETUP.EXE file and follow the installation steps.
- TouchPad Application [required]
  - Unzip the TouchPad.zip file, run the SETUP.EXE file and follow the installation steps.
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:

Uninstall the “Power Manager” application (uninstall should be done through the Control Panel – Programs - Uninstall a Program).

Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br/itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11)3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
Install the “SilentMode.zip” application previously downloaded from the Itautec website.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers and applications indicated at the beginning of this procedure, referring to items 3a, 3b and 3c on Before You Begin.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4261 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers e Download):
For the default setting without the glasses nVidia 3DVision with Windows XP / Vista x86
- Sound driver [optional]
  - Unzip the file. ZIP and run the application SETUP.EXE
- LMS-SOL Driver [required]
  - Unzip the file. ZIP for installation of the driver via Device Manager.
- HECI Driver [required]
  - Unzip the file. ZIP for installation of the driver via Device Manager.
For the default setting without the glasses nVidia 3DVision with Windows Vista x64
- Sound driver (for Windows 7 x64) [optional]
- Video Driver / nVidia glasses 3dVision [required]
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
No need to uninstall any application
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
- Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
  São Paulo vicinity: + 55 (11) 3543-5543
  Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4270 Desktop Upgrade for Windows 7.

Untitled Document

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers e Download):
- Sound driver [optional]
  - Unzip the file. ZIP and run the application SETUP.EXE
- Video Driver [required]
  - Unzip the file. ZIP and run the application SETUP.EXE
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
No need to uninstall any application
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
São Paulo vicinity: + 55 (11) 3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4150 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
  - 1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
  - 1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
  - 16 GB of available disk space (32 bit) / 20 GB (64 bit)
  - DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
  - Compatible DVD driver
  - Internet access (fees may apply)
    NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (área de Drivers e Download):
- Sound driver [optional]
  - Unzip the file. ZIP and run the application SETUP.EXE
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
No need to uninstall any application
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- For this platform, there is no support for the AMT interface (LMS - SOL - MEI)
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided
Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
São Paulo vicinity: + 55 (11) 3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in “Before You Begin” - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click “Run setup.exe”.
Click “Install now”.
Wait while the installation completes.
At the “Get important updates for installation” window, we recommend that the option “Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click “I accept the license terms” and then click the NEXT button to continue.
Click the “Upgrade” option and wait for the installation to be completed.
On the “Compatibility Report” window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message “Press any key to boot from CD or DVD” appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the “Install now” button.
Read the license terms and, if you agree, click “I accept the license terms” and the NEXT button to continue installation.
Click the “Custom (advanced)” option.
Click on “Drive options”, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, “John” and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, “Joao063049” and "I and Susana’s birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click “Use recommended settings”.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click “Ignore”.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay SM3221 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Driver de Vdeo [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay SM3320 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]

Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay SM3221 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (rea de Drivers & Download):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:

No necessrio desinstalar nenhum aplicativo

Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:

Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

You cannot upgrade from Windows XP to Windows 7 without loss of the contents of the hard disk. Thus, to install Windows 7 with Windows XP pre-installed, you must replace the operating system with Windows 7.
DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO MAKE A COPY OF ALL FILES THAT YOU WANT TO KEEP.

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay SM3322 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]

Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Driver de Vdeo [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST1350 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Vdeo [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4160 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Driver HECI [requerido]
- Descompactar arquivo .ZIP e instalar o arquivo .INF via gerenciador de dispositivos

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4243 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4243N Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4250 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4251 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Driver de Vdeo [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4252 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

InfoWay ST4262 Desktop Upgrade for Windows 7.

Before You Begin:

We highly recommend that you make a backup copy of documents, spreadsheets, emails, email contacts, pictures, music, videos, application installers and other files on your hard disk. Note that if the type of installation chosen is to install a new copy of Windows (Windows 7), the entire contents of the hard disk will be deleted. To make a backup copy, you may copy your files to DVD, another hard disk, other equipment in the network, etc.
For the upgrade options in which the contents of the hard disk are not deleted, we strongly recommend that the steps below are followed before starting the upgrade procedure:
- Print these instructions to serve as a roadmap during the upgrade process.
- Check with the suppliers if programs installed in your equipment are compatible with Windows 7.
- Verify that the hardware requirements (CPU, memory, etc.) meet the recommended requirements for Windows 7.
1 GHz processor or faster, 32-bit (x86) or 64-bit (x64)
1 GB of RAM (32 bits) / 2 GB of RAM (64 bit)
16 GB of available disk space (32 bit) / 20 GB (64 bit)
DirectX 9 graphics processor with WDDM driver version 1.0 or higher (all Itautec equipment listed as compatible with Windows 7 meet this requirement)
Compatible DVD driver
Internet access (fees may apply)
NOTE: Some Windows 7 features, such as the ability to watch and record live TV, BitLocker or touch navigation may require advanced or additional hardware. The Windows XP mode requires an additional 1 GB of RAM and 15 GB of available disk space, and a processor capable of hardware virtualization, Intel VT or AMD-V enabled.
- Run Windows Update and install the latest Service Pack, in addition to all critical and recommended updates.
- Download the drivers and utilities listed in these instructions and make a copy on media (CD, DVD, Pen Drive, etc.). Note that during the upgrade process you may lose the ability to access the Internet before you install the drivers and applications listed in the instructions.
- Have at hand the original Master CD of the equipment and the Windows 7 upgrade kit.
Make the following downloads via www.itautec.com (area de Drivers e Downloads):

Driver de Som [opcional]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Driver LMS-SOL [requerido]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE
Driver MEI [requerido]
- Descompactar arquivo.ZIP e executar o aplicativo SETUP.EXE

Before proceeding with the installation without reformatting the hard disk, uninstall the following applications:
- [No necessrio desinstalar nenhum aplicativo]
Limitations:
- Versions of Nero Essentials will not be supported in Windows 7.
- AVG 8.0 is not compatible with Windows 7. It should be upgraded to version 8.5 or later. Go to www.avgbrasil.com.br /itautec and follow the instructions to upgrade.
- Equipment without PowerDVD or WinDVD will not have the functionality of DVD copy in the Windows 7 Starter version. To copy DVDs using the Windows 7 version, the user must purchase any software compatible with Windows 7 available on the market.
- Note that:
- The upgrade information contained herein relate to the original configuration of the equipment (hardware and software).
- The cost of Internet access is the responsibility of the user.
- Support for applications and devices installed by users is the responsibility of their respective manufacturers.
- Itautec will provide support only for configurations that meet the minimum requirements for installing Windows 7.
- The customer is responsible for backing up data, and no technical support for this operation will be provided.
Itautec Technical Support by Phone:
Hours: Monday to Saturday, from 8 a.m. to 8 p.m. (UTC/GMT -3 hours), except holidays.
So Paulo vicinity: + 55 (11)3543-5543
Other locations: 0800-550020 (in Brazil)

Upgrading an existing installation of Windows Vista to Windows 7

Start the equipment with the current operating system (Windows Vista).
Make sure that the applications listed in Before You Begin - item 4 - have been uninstalled.
Insert the Windows 7 installation DVD in the drive.
In the Autoplay window, click Run setup.exe.
Click Install now.
Wait while the installation completes.
At the Get important updates for installation window, we recommend that the option Go on line to get the latest updates for installation" be selected (you need an active Internet connection). Wait while the updates are being downloaded. Otherwise, select the other option and continue with the operating system upgrade.
Read the license terms and, if you agree, click I accept the license terms and then click the NEXT button to continue.
Click the Upgrade option and wait for the installation to be completed.
On the Compatibility Report window, click NEXT.

If the Compatibility Report indicates a program that is not compatible with Windows 7, remove it before proceeding. To do so, cancel the installation, remove the program(s) not compatible and restart the installation.

Wait while the installation completes. This process may take more than one hour.
Enter the product key (the 25-character alphanumeric key can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT to continue.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. However, we recommend configuring the network later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.
- If you have an antivirus installed, we recommend that it be updated.

Upgrading an installation of Windows XP to Windows 7

Replacing Windows XP with Windows 7

DURING THIS PROCESS, THE CONTENTS OF THE HARD DISK WILL BE DELETED. MAKE SURE TO HAVE A COPY OF ALL FILES THAT YOU WANT TO KEEP.
Turn on the equipment; insert the Windows 7 installation DVD in the drive.
When the message Press any key to boot from CD or DVD appears, press the spacebar and wait Windows Installer 7 to be loaded.
On the installer home screen (language, date / time format and keyboard), click the NEXT button.
Click the Install now button.
Read the license terms and, if you agree, click I accept the license terms and the NEXT button to continue installation.
Click the Custom (advanced) option.
Click on Drive options, select each of the partitions on the disk on which you will perform the Windows 7 installation (typically is Disk 0), click "Delete" and confirm that operation. Repeat the process until there is no longer any partitions on this disk.
Click the NEXT button.
Wait while the installation completes. This process may take more than one hour.
Wait for the automatic restart of equipment.
When prompted, enter the information in user and computer name. For example, John and "John-PC". Click NEXT.
Enter your password and a password hint (required fields). For example, Joao063049 and "I and Susanas birthday" (for increased security, do not choose obvious hints).
Enter the product key (it can be found in the Windows 7 upgrade kit that you received).
On the security settings window, click Use recommended settings.
Adjust the time zone, date and time and click NEXT.
If your equipment has a WiFi network adapter, you may select the desired network and configure it. If you want to make it later, click Ignore.
Wait for Windows 7 to start.
To finish your installation:
- Install the drivers listed at the beginning of these instructions.
- Reinstall the applications that you want to keep (PowerDVD, Power2Go, DVD Suite, Microsoft Office, etc.).
- Restore the backup of your documents.
- Activate your copy of Windows 7 via the Internet (if this is not done within 30 days, your copy may have its functionality limited and / or blocked).
- We recommend that you run Windows Update to ensure that all the latest product updates are installed.

For more Information:

http://windows.microsoft.com/en-US/windows7/products/features/windows-easy-transfer
http://windows.microsoft.com/en-US/windows7/downloads/upgrade-advisor
http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7
http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7